• Measurement of 3-phase currents, voltages, powers, energies, harmonics & power quality information
• All features easily accessible through a graphical menu driven display
• Large Colour LCD screen
• Continuous cycle-by-cycle measurement at 256 samples/cycle for accurate readings even on nonlinear loads
  Simultaneous sampling of all 6 input channels for accurate capture of even minor variations
  Suitable for 2 wire, 3 wire and 4 wire measurements
• 2MB memory (4MB for ALM 32) capacity with programmable interval of data collection
• Recorded data can be viewed as trends on the meter
• 8 screens (12 for ALM 32) of data, trends, waveforms, vector diagrams, bar graphs etc. can be stored
• Different parameters can be recorded under 4 userdefined configurations
• Wide choice of clamp-on CTs to measure currents from 100mA to 3000A
• Captures up to 4096 alarms – min/max value and duration of alarm (minimum 1/2 cycle detection)
• RS–232 serial port for communication and data transfer to a PC
• Measurement of transients possible in ALM 32
• Up to 10-hour battery back up

The Load Manager ALM 30/ALM 32 is clearly an ideal investment to meet your present as well as future measurement needs. Unlike the portable analysers that use conventional measurement techniques, the ALM 30/ ALM 32 will not become obsolete as far as your application is concerned.